Hobart Food Equipment | UX-ER | PROFI Series Utensil/Pot Washer With Exhaust Heat Recovery and Vapostop, 30 cycles p/h

UX with addition of integrated exhaust heat recovery and VAPOSTOP system. Negates need for an exhaust canopy

• Front door utensil washer
• Useable inside dimensions w x d x h: 663 x 808 x 840 mm
• Nominal capacity up to 30 cycles/h
• 5 automatic cycles: short, standard, intensive, continuous, hygiene
• Double walled housing
• Multi-Setting: booster capacity may be reduced from 12.4 kW to 6.2 kW if connected with hot water
• Strainer soil sensor
• Refill signal (detergent / rinse aid)
• Self-cleaning programme
• Ready to install - completely equipped: fill / drain hose, electrical cable, detergent dispenser, rinse aid dispenser, rinse pump, drain pump, back-flow preventer, tank heating, back panel
• Tank, frame, wash / rinse arms and panels are stainless steel 1.4301.
• (Optional) Exhaust heat recovery with VAPOSTOP
• Includes - stainless steel base rack, tray support insert (323637) and plastic 500 x 500mm flat rack

FEATURES:

• VISIOTRONIC control: single button control with remaining time indicator together with text and graphic display
• SENSO-ACTIVE resource management: constantly measures the quality of the wash water and keeps the amount of rinsing needed in each rinse cycle to the minimum in order to guarantee a fully hygienic wash result
• POWER wash: high-pressure washing to wash heavily soiled wash items
• CLIP-IN wash and rinse arms: wash and rinse arms can be removed with one hand and without any tools
• USB-interface: comfortable download of operational data in form of a protocol via USB
• GENIUS-X² fine filter system: advanced filter system with prewash function reduces detergent consumption up to 35 %
• ROTOR-X wash system: separate rotating upper and lower 4-spoke wash arms deliver dynamic wash power
• VAPOSTOP (optional): prevents vapour to escape from machine when door is opened
• The optional exhaust heat recovery uses steam to heat fresh feed water and reduces the amount of power needed, saving up to 3.1 kW
• Loading height: above-average loading height of 860 mm
• Intelligent energy management: the available energy is used continuously. Thus, at a low total loading value the heating time gets reduced
• Machine height 2-in-1: machine height can be reduced by up to 217 mm with the door open – for use in spaces with low ceilings
• Interlocked strainer: prevents operation without tank strainer
• EASY-CLEAN concept: blue markings in the machine help the operator to identify the components which require cleaning
• Hygiene programme: for removal of calcium carbonate and other deposits from wash chamber
• Watermark approved toWMTS-101:2018, Cert. WMKT21944